Reticle library · Trijicon
Drawn to scale from Trijicon’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Trijicon, Inc.’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
SFP, true at 20x. Black crosshair with a fibre-optic / tritium green dot at the intersection (drawn 0.057 mrad as on the sheet; no diameter is printed). Thin lines 0.04 mrad; the elevation line below centre is 0.06. Marks every 0.5 mrad on all four arms, 0.2 tall at the half mils and 0.4 at the whole mils, to 4.5. 0.4 mrad posts with a pointed tip at 5 mrad and full width at 5.3, drawn to 7 (artwork ends 6.7-7.7).
Verified 15 Oct 2026 against AccuPoint_MRAD_Ranging_Reticle_200149.pdf read as vector fills. Scale 35.90 pt/mrad from the mark lattice (0.5-mrad pitch, 36 marks to 0.01 mrad) and the 5 MRAD (post tip) / 5.3 MRAD (full post width) / 1 MRAD dimension lines. Drawn sizes agree with the callouts: marks 0.21 / 0.41 (0.2 / 0.4), post 0.41 (0.4), thin line 0.04-0.05 (0.04 MRAD THIN LINE WIDTH), lower elevation line 0.06 (0.06 MRAD callout across it). Dot diameter measured, not printed.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Trijicon.