Reticle library · Trijicon
Drawn to scale from Trijicon’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Trijicon, Inc.’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
SFP, true at 6x. German-#4 style: 0.33 MOA horizontal line +-15 with 2 MOA marks at 5 and 10, 2 MOA posts from 15 (drawn to 30); an illuminated LED dot at centre, drawn 0.5 MOA as on the sheet (no diameter is printed - the three 0.33 MOA callouts are the line and hash thicknesses); 0.6 MOA elevation line (drawn up to 20, where the sheet's artwork ends). Holds for .223 as printed: 2 MOA wide, 0.33 thick hashes at 2.8, 6.7, 11.7, 18.2, 27.0 MOA below centre, and the 2 MOA post from 37.9 MOA (the last printed hold is the post's top edge). No ballistic calibration is claimed here beyond the maker's labels; use the MOA values.
Verified 15 Oct 2026 against CredoHX_BDC_Hunter_Holds_-_LED_Dot_.223_Reticle_2900020_2900018_.pdf read as vector fills. Scale from the 5 MOA mark pitch and the 30 MOA / 15 MOA dimension lines; every hold hash measured at the printed MOA (2.8, 6.7, 11.7, 18.2, 27.0) within 0.15 MOA, +-1.0 wide, 0.32-0.34 thick (0.33 MOA callouts x3), 5/10 marks 2.0 tall, horizontal posts 2.0 thick from 15.0 (2 MOA callout), elevation line 0.63 (0.6 MOA), post top at 37.9.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Trijicon.