Reticle library · Vortex
Drawn to scale from Vortex’s own specification sheet, and checked mark by mark by a person. This is the same geometry Harson Ballistics draws your holdover on.
Drawn from Vortex Optics’s published specification.
In the second focal plane the subtensions are only true at one magnification — check your manual for which, and dial there before you hold.
SFP; the per-scope sheet: subtensions 'correspond to the highest magnification' - 15x. Rebuilt 9 Oct 2026 from the per-scope sheet, which overrides the VMR-3 MRAD reticle manual (M-00357) the old record came from (old: referenceMagnification 15.0, line 0.09, no centre dot). Published: illuminated centre dot 0.04; line 0.09; marks every .5 mil, .2 long at half mils and .4 at whole mils; side bars from 5 and the bottom bar from 9, .5 thick. Drawn, not published (the sheet is to scale on every other callout): marks to 4.5 each side and 8.5 below, centred on the line; a plain line above centre with no marks and no bar; the line runs through the centre. The red dot is drawn 0.125 across, oversized as on the other Viper HD sheets; the record carries the published 0.04. Bars drawn to 12 mil. Reticle image shown for representation only.
Verified 9 Oct 2026 against specs/vortex/VTX_VPR-31503_VMR-3_MRAD_RS_I_RI_ST.pdf page 1 (re-downloaded from the source URL the same day, byte-identical). Scale 19.3272 pt/mil fitted to the side bars at 5, centre (198.0, 221.103) = the red dot; geometry converted exactly from the vector outlines. Every published callout is checked in tools/build_vortex_wave2.py and lands except one, recorded as published: 0.04 centre dot: published 0.04, drawn 0.1250. Checklist walked: rows and extents, hash spacing, numerals, centre element and gap, post tips, which side of the line each mark sits (all centred unless the notes say otherwise), every callout.
Harson Ballistics draws this reticle at your magnification with your holdover marked on it, from your rifle, load and conditions. Works with no signal and no account.
Subtensions are published by the manufacturer and reproduced here for reference. Confirm your own dope on a range before you rely on any of it. Harson.ai is not affiliated with Vortex.